The VK Link can be used to filter outdoor air before delivering it inside to recirculate decontaminated air between spaces, or designed into more creative and novel airflow applications by a specialist HVAC designer or installer.
The VK Link is an air delivery component and must first be designed into a new or existing indoor airflow system by a qualified or licensed HVAC designer or installer. It is installed into an infrastructure’s ducting or airflow system or for new applications, typically installed in roof space or in a dedicated airflow control room/cabinet.
The VK Link brings the full suite of Radic8 filtration, VOC neutralization, and active decontamination to HVAC systems. This adds a new standard of clean air to indoor spaces with built-in airflow systems and active viral and bacterial deactivation that traditional HVAC solutions cannot provide by themselves.
Radic8 products are freestanding, mobile, plug-and-play devices that protect the breathing zone in a room. The VK Link is a clean air component — a single part of a larger ducting or ventilation network, designed to be built into airflow systems to maintain whole-room ambient air quality.
No, the VK Link must be installed by a licensed, qualified HVAC or airflow contractor along with ducting, diffusers, and other airflow components to match the intended space. As such, each installation of the VK Link is unique.
Yes, while the VK Link can be integrated into an existing airflow system, it can also be used independently. It can be installed along with any required ducting, diffusers, or vents in most indoor spaces to serve any number of functions from fresh, outdoor air delivery to advanced recirculation.
Yes! The VK Link is designed to be compatible with standard ducting, with intakes and outputs terminating in an industry-standard 200mm size.
Absolutely. The VK Link is designed to clean air during transport and delivery, while the Radic8 freestanding range protects breathing zones from pollutants generated within a space. The use of both means clean air upon arrival and real-time protection between and among occupants.
No. The VK Link requires servicing and maintenance by an HVAC specialist or company.
The VK Link has been designed with technicians, installers, and maintenance personnel in mind. A single, easy-to-open front panel grants access to all internals for filter changes and scheduled maintenance.
Absolutely. The VK Link meets a host of international electrical, safety and emissions standards and has achieved certifications by a host of regulatory bodies and laboratories.
All known by-products have been identified, and where risks exist, have been tested against. VK Link is ozone free and, where scientifically possible to demonstrate is well within or under safe limits for various emissions.*
*Ozone: Hextio emits less than 0.005 ppm of ozone, over a 24-hour period, which falls below the acceptable zero-ozone emission limit required by leading authorities on consumer safety standards in North America. UV: With filters removed, total irradiance measured at 0 cm from all device outlets is less than 1 mW/m2.
Yes, given adherence to the relevant user instructions our devices are entirely safe for commercial, residential, public, and industrial use of all kinds. Our patented technology — the Reactor Chamber — contains safety features that prevent accidental exposure to UV light and has been tested for emissions and electrical compliance.
95m2 (1022ft2) i
220–270 CFM
Black
52–58 dB
In-duct
CO2
Included
1 Year
180W
14.1kg (31lbs)
365 x 330 x 528
14.37 × 13 × 20.7
Reusable
6 Months (4,000 hrs)ii
6 Months (4,000 hrs)ii
8,000 Hours
For all other technical support enquiries, or to enquire about our products and technology:
"*" indicates required fields